elsner elektronik KNX Touch One Style, Технические характеристики и инструкции по установке

Страница: 6 / 8

6 Installation
Room Controller KNX Touch One Style • Status: 06.03.2017 • Errors excepted. Subject to technical changes
2.3.2. Cavity wall fitting
2.4. Assembling the operating unit
During electrical installation, please introduce all connection cables into the concealed
box through the lower or upper side wall.
By adjusting the mounting screws, the display unit will rest flat on the wall later and be
held by the magnets safely.
Connect the cables to the display and place the display unit on the concealed box. The
magnets must be attracted by the mounting screws considerably and the display unit
must rest tightly on the concealed box.
Clamp the concealed box to the wall
with the four enclosed screws.
Upon delivery, the pouch containing
the assembly screws can be found in
the control unit’s concealed box.
or
Adjust the screws of the magnetic
mounting with the enclosed template.
Each of the four screws must be ad-
justed individially in height.
When the edge of the template rests
on the wall surface (1), the template
must rest on the mounting screws as
well (2).
1
1
2