![background image](http://html1.mh-extra.com/html/elsner-elektronik/knx-r/knx-r_installation-and-adjustment_2396605004.webp)
3
Description
Rain Sensor KNX R
• Date of issue: 05.11.2010 • Technical changes reserved. Errors reserved.
1. Description
The
Rain Sensor KNX R
registers precipitation and transfers the status to the KNX
system. One switching output as well as AND and OR logic gates are available. The
sensor system, the evaluation electronics and the electronics of the bus connection are
mounted in a compact housing.
Functions:
•
Precipitation perception
: The surface of the sensor is heated so that only
drops and flakes are recognised as precipitation but not fog or dew. If it stops
raining or snowing, the sensor dries quickly and the precipitation message
ends
•
1 switching output
•
4 AND and 4 OR logic gates
with each 4 inputs. Every switching incident as
well as 8 logic inputs (in the form of communication objects) may be used as
inputs for the logic gates. The output of each gate may optionally be configured
as 1 bit or 2 x 8 bits
Configuration is made using the KNX software ETS. The
programme file
(format
VD2), the data sheet and the manual can be downloaded from the Elsner Elektronik
homepage on
www.elsner-elektronik.de
in the “Service” menu.
1.1. Technical specifications
Housing
Plastic material
Colour
White/translucent
Mounting
On-wall
Protection category
IP 44
Dimensions
approx. 96 × 77 × 118 (W × H × D, mm)
Weight
230 V AC version: approx. 240 g,
24 V DC version: approx. 170 g
Ambient temperature
Operation -30…+50°C,
Storage -30…+70°C
Operating voltage
Available for 230 V AC or 24 V DC (20 V AC).
An appropriate 20 V AC power supply unit can be
obtained from Elsner Elektronik.
Cable cross-section
Massive conductors of up to 1.5 mm² or conductors
with fine wires
Current
230 V AC version max. 20 mA,
24 V DC version max. 100 mA,
Residual ripple 10%
Data output
KNX +/- bus terminal plug
BCU type
Own micro controller
PEI type
0
Group addresses
max. 254