43
Setting of parameters
Indoor Sensor KNX AQS/TH
• Date of issue: 13.10.2011 • Subject to technical changes. Errors excepted.
4.15.4. Linkage inputs of OR Logik
The linkage inputs of the OR logic correspond with the parameters of the AND logic.
The OR logic is additionally provided with the following inputs:
Switching output AND logic 1
Switching output AND logic 1 inverted
Switching output AND logic 2
Switching output AND logic 2 inverted
Switching output AND logic 3
Switching output AND logic 3 inverted
Switching output AND logic 4
Switching output AND logic 4 inverted
Switching output AND logic 5
Switching output AND logic 5 inverted
Switching output AND logic 6
Switching output AND logic 6 inverted
Switching output AND logic 7
Switching output AND logic 7 inverted
Switching output AND logic 8
Switching output AND logic 8 inverted
Value of parameter
„
Transmission behaviour“:
Setting options
„Behaviour of switching output with
release“:
on change of logic
• do not send telegram
• send value for current logic status
on change of logic to 1
• do not send telegram
• if logic = 1
send value for 1
on change of logic to 0
• do not send telegram
• if slogic = 0
send value for 0
on change of logic and periodically
send value for current logic status
(no selection)
on change of logic to 1 and periodically
if logic = 1
send value for 1
(no selection)
on change of logic to 0 and periodically
if slogic = 0
send value for 0
(no selection)
on change of logic and receipt of object
• do not send telegram
• send status of the switching output
on change of logic and receipt of object
and periodically
send value for current logic status
(no selection)
