elsner elektronik 70516 Скачать руководство пользователя | Manualshive

Страница: 7 / 60

background image

5

Installation and commissioning

Actuator KNX S1R-BA4-UP 24 V

• Version: 27.05.2020 • from software version 4.00, ETS programme version 4.0 •

Technical changes and errors excepted.

The product is compliant with the provisions of EU guidelines.

2.

Installation and commissioning

2.1. Installation notes

Installation, testing, operational start-up and troubleshooting should
only be performed by an electrician.

CAUTION!
Live voltage!

There are unprotected live components inside the device.

•

National legal regulations are to be followed.

•

Ensure that all lines to be assembled are free of voltage and take
precautions against accidental switching on.

•

Do not use the device if it is damaged.

•

Take the device or system out of service and secure it against
unintentional use, if it can be assumed, that risk-free operation is
no longer guaranteed.

The device is only to be used for the intended purpose described in this manual. Any
improper modification or failure to follow the operating instructions voids any and all
warranty and guarantee claims.

After unpacking the device, check it immediately for possible mechanical damage. If it
has been damaged in transport, inform the supplier immediately.

The device may only be used as a fixed-site installation; that means only when assem-
bled and after conclusion of all installation and operational start-up tasks and only in
the surroundings designated for it.

Elsner Elektronik is not liable for any changes in norms and standards which may occur
after publication of these operating instructions.

2.2. Safety notice for automatic functions

WARNING!
Risk of injury from automatically moving components!

Parts of the system can be started by the automatic controls
and be a danger to persons.
•

No persons may remain in the travelling range of parts
driven by an electric motor.

•

Adhere to the relevant building regulations.

«
...
5
6
7
8
9
...
»

Содержание 70516





























































Отзывы:

Нет отзывов

Похожие инструкции для 70516

Minas A4 Series

Бренд: Panasonic Страницы: 5

Бренд: ZirbenLüfter Страницы: 36

Бренд: Veer Страницы: 2

Бренд: Jabra Страницы: 18

Бренд: Vacon Страницы: 132

Бренд: National Instruments Страницы: 78

Бренд: I-Tork Страницы: 15

Бренд: MGC Страницы: 16

Бренд: ICP DAS USA Страницы: 7

Бренд: Espressif Systems Страницы: 11

TRULUX DMX 3Z Touch Control

Бренд: American Lighting Страницы: 2

Бренд: Lucci comfort Страницы: 3

Бренд: Peg-Perego Страницы: 48

Бренд: M-system Страницы: 7

Бренд: Smarthome Страницы: 12

Бренд: Zamel Страницы: 2

Бренд: CAME Страницы: 2

Бренд: Doepke Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды