elsner elektronik 70151, Установка и настройка

Страница: 15 / 30

13 Settings on the device
Ultrasonic Probe KNX SO250 • Version: 14.09.2020 • Technical changes and errors excepted.
Standard screen:
Press key once to enter the “Settings“ menu.
Press key to confirm your selection and continue as described for the relevant tank
design.
4.3.1. Rectangular tank
Use the keys and to select the maximum capacity of a tank (in a later step the
number of existing tanks can be specified).
Setting options: Litres : 1 to 99 l in increments of one Litre, 100 to 900 l in increments of
hundred Litres, 1000 to 100,000 l in increments of thousand Litres. Cubic metres : 1 to
99 m
³
in increments of one cubic metre, 100 to 900 m
³
in increments of hundered cubic
metres, 1000 to 100,000 m
³
in increments of thousand cubic metres.
KNX SO250 Tank Sensor
Distance: 59.4cm
Settings >
KNX SO250 Tank Sensor
Tank content:
4885 Litre
Settings >
or
Distance measurem.>
Fill level meas.
>™
Relay set-up >
Acoustic alarm >
Move the cursor (flashing rectangular at the right
side) using the keys
and to the menu item
“Fill level measurement“ and press key .
Rectangular tank >™
Spherical tank >
Cylinder vertical >
Cylinder horizont.>
Move the cursor using the keys or to the re -
quired setting. The KNX SO250 can determine the
fill level of rectangular tanks, spherical tanks, ver
-
tical or horizontal cylindrical tanks.
Tank volume in l >™
Tank volume in m
3
>
Please select unit!
Move the cursor (flashing rectangular at the right
side) using the keys
and to the required set-
ting. You can specify the capacity of a tank in Litres
(l) or cubic metres (m
³
). Press key to confirm
your selection.
Please enter the
maximum capacity
of one tank:
5000 Litres >™ Please enter the
maximum capacity
of one tank:
5000 m
3
>™
or