![background image](http://html.mh-extra.com/html/elsner-elektronik/70141/70141_installation-and-adjustment_2396675010.webp)
8
Installation and Commissioning
Power Supply Systems KNX PS640+ and KNX PS640+USB
Version: 19.08.2020 • Technical changes and errors excepted.
3.
Settings of the device
3.1. Starting Position
The following may be read off and set on the display of the power supply system KNX
PS640+:
•
Reset of a line
•
Recall of the data memory with operating hours, overcharge, external electrical
surge, internal electrical surge, short circuit and excess temperature
•
Recall of the operating data bus voltage, bus current and temperature
•
Language of display
The display is dimmed after 60 seconds if during this period no key is pressed.
3.2. Key functions in display menu
3.3. Line reset
Confirms the selection, moves to the next step.
One step back.
Changes a setting (selects a setting or changes a
value). The cursor (the blinking rectangle) indicates
the selected menu item.
ok
Confirms the settings and returns to the device main
menu.
elsner elektronik
KNX Power Supply
Normal Operation
Diagnostics >
elsner elektronik
KNX Power Supply
Normal Operation
Diagnostics >
In starting position, press key once.
Line Reset
> ™
Data Memory
>
Operating Data >
Language
>
Press key once more in order to get into the sec
-
tor
„
Line reset
“
.
Reset: Yes ™
No
30 seconds
Reset not active!
Move the cursor (flashing rectangle at right edge)
to the desired setting with the keys
or
and
confirm with key
ok
.