112
Basic Setting
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
Name
Press the button to change the name. Enter the desired name via the keypad that ap-
pears.
2.4. Input keyboard for names and codes
Confirm your input with the
OK
button.
Status of input
It displays whether the relay is currently open or closed.
6.1.6. Wireless connections
Devices that communicate wirelessly with the control unit must first be learned by the
control unit.
When learning wireless connections, always comply with the data sheet of the relevant
wireless device. The instructions for learning WGTH-UP indoor sensors can be found
in the Chapter
Setting up a wireless connection using WGTH-UP
.
WARNING!
Electric voltage!
Some devices have programming keys for learning the radio connection
inside their housings. and thus beneath unprotected live parts.
•This devices should only be learned by a trained electrician
(according to VDE).
This menu allows you to learn, control and delete radio connections. Press the buttons:
Learn wireless connection
Press
Learn
to bring the control unit into learning readiness mode. Then follow the in-
structions for the respective wireless participant (press PROG key or switch power sup-
ply on).
For wireless components that are learned by switching on power, you can switch on
the supply for all devices at the same time. The components learn themselves one after
the other automatically. For wireless components that are learned by pressing the PRG
button, please repeat the learning procedure with all of them.
Name 1
Installation
Radio Connection
System
Learn