Pressure can be read from digital screen
and/or pressure scale from reservoir.
If you just turn on the compressor after
draining the reservoir or from an empty
reservoir, pressure in reservoir may be low
or empty.
If the compressor is on, the reservoir
gauge should indicate pressure is building
up.
Wait for desired pressure
(6 Bar).
Is there pressure in the reservoir?
Pressure displayed on screen and reservoir gauge
Compressor restart procedure instructions:
1. Turn off the compressor
2. Drain the compressor tank by opening the
outlet valve
3. Start the compressor and build up the pressure
again
If pressure still not building up, it could indicate
a faulty compressor. Review air compressor
manual or contact to your compressor supplier.
Pneumatic equipment
Maintenance and service manual
PH: 1300 655 383
16
