iNode Control ID – instruction manual
ELSAT s.c.
The picture below shows the
Security
tab:
The following items can be set:
Connection is possible from this computer only
: this option enable you to protect the
iNode
Control ID
access from others PCs or phones. You can reset this protection by battery removing
for at least one minute.
This type of protection cannot be set in case of
iNode Control Point
.
Connection is password protected
: access to the
iNode Control ID
is password protected.
Password length is 16 characters maximum.
Battery removing will clear the password
: if you unchecked this option than please remember
that if you forget the password it can be cleared by manufacturer only.
You can save modified settings by pressing the
Write
button.
page 5
