ELSA LANCOM Business 6000, Руководство пользователя

Страница: 93 / 174

|
Operating modes and functions
93
|
ELSA LANCOM Business 6000
|
EN
Script
Enter the script here as described in the reference section of the
documentation.
6.8.9 Call acceptance
The call acceptance settings for the ELSA LANconfig can be found in the
'Communication' configuration section on the 'Call accepting' tab, or under
/Setup/WAN-module/Protect
during Telnet or terminal sessions.
Use the call acceptance settings to determine the circumstances under which
the unit will accept incoming calls. These settings only apply to the unit's
router functions.
all
Every call is accepted.
by name
Every call is accepted at first. During the protocol negotiation the name
is determined and checked against the name list. The connection is
maintained if the name is present, otherwise it will be rejected.
by number
The call will only be accepted if the remote station is entered in the
number list and the number is transferred to the remote station.
by name or number
The call will be accepted if one of the two checks was successful.
6.8.10 Number list
The number list in the ELSA LANconfig can be found in the 'Communication'
configuration section on the 'Call accepting' tab, or under
/Setup/WAN-
module/Number-list
during Telnet or terminal sessions.
The number list is used as a call acceptance control measure during passive
call establishment and to initiate callbacks.
Phone number
Number transferred by the calling remote station (including country and
area codes as applicable).
Remote site
Name of the remote site as specified in the name list. The remote station
will be called back if so specified in the name list.