ELSA GLADIAC 511, Руководство пользователя

Страница: 28 / 46

Technical data
|
| ELSA GLADIAC 5II |
28
EN
produce a stabile image. In some cases, the switch settings are labeled only
with 'Low' and 'High'. If this is the case, either you can look up the Ohm values
for the switch settings in the user manual provided with your monitor or you
can try both settings to see which one produces a stabile image in all of the
graphic display modes you require.
5.3.5 The S-video connector
Pin assignments
5.3.6 The DVI Interface
The combined Digital Visual Interface (DVI-I) provides a high-speed digital
connection for digital monitors and also supports the connection of analog
monitors. DVI enbles hot plug&play and is also display-technology indepen-
dent. Combined DVI enables:
쎲
Loss-free digital transfer from PC to monitor;
쎲
Digital and analog support in a single connector;
쎲
Plug&play using hot plug detection, EDID and DDC2B.
The combined connector includes 29 signal contacts, divided into a digital
section consisting of three rows of eight contacts and an analog section con-
sisting of five contacts for analog signals. The DVI-I interface accomodates a
12 or 24 pin DVI plug connector or a new type of analog plug connector that
uses four additional pins, plus a ground plane plug to maintain constant
impedance for the analog RGB signals.
A DVI connector can only be inserted into the DVI-I interface. It cannot be
plugged into the analog interface. Likewise, an analog plug connector cannot
be inserted into a DVI-I interface without the supplied DVI/VGA adapter.
Pin Signal Pin Signal
1 GND, mass (Y) 3 GND, mass (C)
2 Y, intensity (luminance) 4 C, color (chrominance)