ELSA ERAZOR III LT, Руководство пользователя

Страница: 17 / 56

Video––what’s in, what’s out?
ELSA ERAZOR III Pro and ELSA ERAZOR III LT
11
Video––what’s in, what’s out?
This section is relevant only for those boards equipped for video functionality. You can
check if this is the case with your board by looking at the connectors on the mounting
bracket of the ELSA ERAZOR III. If your board is fitted with a VGA connector only, then
you unfortunately cannot make use of the functions described here.
The
ELSA ERAZOR III has a video socket to which you connect the composite video
adapter cable supplied. The sockets on the composite video adapter cable allow you to
connect three video sources and two output devices. Exciting new possibilities are
opened up under Windows 98 and Windows 95 with the board’s video capabilities–
especially the video-in function.
Signal interchange––an overview
Below we will show you just how open the ELSA ERAZOR III is to all sides.
The illustration shows you, on the left, the input devices which can be connected to the
graphics board. Your ELSA graphics board has three inputs, two of these are composite
video inputs and one is a S-VHS input. The board is capable of processing the PAL, NTSC
and SECAM video standards.
On the right, you see the devices capable of displaying the VGA signal from the computer.
You can send the content of the computer screen through the video-out sockets to a tele-
vision, a video recorder or a projector.
You can operate your ELSA ERAZOR III with a monitor and a TV simultaneously.
Television
Video
recorder
Projector
Video camera
Video recorder
Laser disk
player
Satellite
decoder
Video-In Computer with ELSA
ERAZOR III
Video-Out