ELSA ECOMO 17DFP99, Руководство пользователя

Страница: 13 / 26

Installation
ELSA ECOMO 17DFP99
7
Installation
When you disconnect the cord/cables, always pull by the connector, not the cord.
Installing the DFP graphics board
Please refer to the card’s installation guides. The DFP graphics board is an optional item
in your monitor package and it may not be included depending on the configuration you
have ordered.
Connecting the LCD monitor
햲
Connect one end of the signal cable (MDR26) to the monitor and the other end
(MDR20) to the MDR connector of the graphics board (
쐃
).
햳
Connect the square B-type connector of the USB cable to the upstream port of the
monitor and the other end (flat A-type) to the computer (
쐇
).
햴
Connect one end of the power cord to the monitor and the other end to the AC outlet
(
쐋
).
햵
Turn on the monitor by pressing the power switch to the on position 'I' (
쐏
).
햶
Then turn on the computer.