Home is not a place, it’s a feeling
AG40MA11
DOOR- / WINDOW SENSOR
MANUAL EN
Symbols:
Recycling and disposal: The WEEE symbol (a) means that this product and ba eries must be disposed
separately from other household waste. When it reaches its end of life, take it to a designated waste collec on
point in your area to guarantee a safe disposal or recycling. Protect the environment, human health and natural
resources! Read the manual (b) before use and store it in a safe place for future use and maintenance.
ELRO Europe | www.elro.eu
Postbus 9607 - Box E800
1006 GC Amsterdam - Nederland
ü
GUARANTEE
Visit www.elro.eu
(a)
(b)
V2
MOUNTING
Remove the ba ery cover
(d)
and mount it using either adhesive tape or screws, and then a ach the sensor
(a)
and fix it with the screw at the bo om. When using screws, use the ba ery cover as a mold to mark drilling
holes. Next, fit the magnet
(b)
to the door (or, in the case of double doors, to the most commonly used door).
Ensure that the parallel gap
(g)
between the magnet and sensor is less than 10mm and the magnet is aligned
with the sensor by using the lines in the middle of both the sensor and the magnet.
IMPORTANT WARNING:
This package can contain small parts and/or
materials which can be dangerous to small
children! Be aware of this, and keep this away
from small children!
SPECIFICATIONS
Ba eries: 1,5V / AAA x 3
Frequenty: 868 MHz
Range: Min.100m in open air
Measurements sensor: 120 x 28 x 20 mm
Measurements magnet: 45 x 9 x 15 mm
For more informa on about the HOME ALARM SYSTEM AG400011 visit www.elro.eu
-3-
(g)
32mm
55mm
(d)
(a)
(b)
