ELRO 8719699342224, Руководство пользователя, Страница: 5 / 84

-5-
Installation on the heating
First of all, you must make sure that the radiator knob fits your heating
system. The standard size of thermostatic shut-off valves is M30x1.5.
That is the size of the washer of the SF40RV11. To find out, check the
brand of your thermostatic valve. You can then look up the dimensions
on the internet. If the radiator knob does not fit your valve, we
recommend that you order an adapter to convert your valve to
M30x1.5.
You can use your thermostat button in just a few steps. After the
thermostat has been installed, it will automatically be in manual mode.
1. To install the radiator button on the heater, press the display of the
radiator button for 3 seconds.
2. Finally, a screen containing F11 appears and the installation light
begins to flicker. At the same time, the thermostat button will
vibrate slightly.
3. The thermostat is now ready to be screwed onto the heater. Turn it
with the mounting ring on the heater and make sure that the screen
is turned the right way.
4. Press the radiator button again and F12 will be displayed. After
about 10 seconds, the installation icon will disappear and the current
temperature will be displayed. The installation is now complete.