3
LED status indication:
CH1 ~ CH4
Green on/off: VGA Signal
Green flash
：
：
：
：
EDID checksum error
Yellow on: Use monitor DDC
Yellow off
：
：
：
：
Use built in DDC
Yellow flash: monitor EDID checksum Error
Yellow, Green, Blue all flash
：
：
：
：
Memory error
VE02ALT/VE05ALT local unit EDID set up:
Setup Monitor EDID: When Yellow LED off, press “SETTING” button until Blue LED flash,
then release the “SETTTING” button, yellow LED will be on.
Setup Built in EDID
：
：
：
：
When Yellow LED on, press “SETTING” button until Blue LED flash,
then release the “SETTTING” button, yellow LED will be off.
Reset factory default: First to unplug the power, then press “SETTTING” button until
reconnect power and Blue LED flash.
Auto Backup EDID
：
：
：
：
Change new monitor
，
，
，
，
it will start the monitor EDID backup.
VE02ALR Remote unit adjustment:
EQ
equalization (sharpness)
Gain
signal boost (brightness)
VE02ALR LED:
Blue (front panel): power on/off
RJ45 LED (Link cable connector):
Green: signal lock
(LED on )
Caution:
The cabling must away from any equipment with electromagnetic wave, i.e.: microwave,
radio equipment, high voltage lines.
Installation Tips:
1.
Due to the inside of CAT5 cable that the pairs of wires are twisted at different rates, AND the different
quality on cable itself and installation that will cause different signal arrival time at each pair. If there
are big different at arrival time, that will cause RGB skew status. This is seen on the monitor as
separation, or lack of convergence in colors. Normally it happens on long CAT 5 cable runs.
2.
Recommend to use following cabling way to reduce skew status, to add special made “skew immunized
adaptor”, 2 pieces included at the package.
CAUTION: to avoid display equipment damaged, be sure to make correct cable connection and
power for VE02ALT, VE05ALT, and VE02ALR before connecting VE02ALT, VE05ALT, and VE02ALR.
Installation Cable:
Video Link cable using hi quality CAT5E UTP/STP or CAT6 UTP cable.
Please noted STP cable could enhance noise rejection, but also less transmission
range and picture sharpness quality.