ELPRO MDL200 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 16

ELPRO MDL200 Скачать руководство пользователя страница 1

9.0 NOTES

This product is guaranteed for 2 years from the date of purchase.

If the fault in the product is due to improper use or operations

carried out by third parties, the warranty is forfeited.

During the warranty period, Elpro will repair the faulty units free of charge.

The faulty units must be sent CARRIAGE FREE to the Elpro offices in Turin with a
regular accompanying note.

The units repaired will be returned CARRIAGE FORWARD to the addressee.

Outside the warranty period, Elpro will repair the faulty units EX its Turin offices, charging the
cost of the repair to the customer.

For any problems during installation of the MDL200,

call the Elpro hot-line 011 9348778

or E-mail: [email protected]

MDL200

SWITCHER/HIGH RESOLUTION SCALER

MDL200

SWITCHER/HIGH RESOLUTION SCALER

•

5 inputs with associated audio

•

Selectable output format

•

Maintenance of settings

•

Optional IR remote control

•

Can be controlled via RS232

MDL200-M

ELPRO Video Labs s.r.l.

Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY

ELPRO Video Labs s.r.l.
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY
Tel.+39 0119348778 - FAX +39 0119348779

16

1

Tel.+39 0119348778 - FAX +39 0119348779

1
2
3
...
»

Содержание MDL200

















Отзывы:

Нет отзывов