ELPRO LIBERO Tx, Руководство по эксплуатации

Страница: 75 / 80

EN - 75 liberoCONFIG
LI6002Eg
MISCELLANEOUS
7
7 Miscellaneous
7.1 What if... ?
Display
Alarm
COM port busy The used COM port is occupied by another program. Close all applications and restart
liberoCONFIG again.
PdF and not ConF on
display The LIBERO Tx buttons were not pressed long enough.

2.3 Start Configuration Mode
Download not
possible exe.-file is classified as spam or is blocked by the firewall. To solve the problem, get in touch
with your IT.
Change of language Change of application language

3.3.2 Options - General
7.2 ELPRO Customer Service Information
If you need any assistance from the ELPRO Customer Center, please make sure you can
provide the following information:
- Software version; Select "About.." in the menu option "Help"
- Device type used
- Which were the preceding actions, before problems arose (exact description of the data
loggers deployment: time, temperature, shock etc.)
- Specification of the error, error codes, original LIBERO PDF report
LIBERO Te1-N Shows a random value or n.c.
LIBERO Te1-P Shows any value and then remains at S.E. or n.c during shut-
down of the PC.
Reason This behavior is caused by connecting a LIBERO Te1 to a
switched off PC.
Set

3.4.2 Logging & 3.4.3 Alarm conditions
Reset / Confirm

5.3.1 Alarm Representation
No display - The alarm mode is deactivated

3.4.3 Alarm conditions