ELPRO LIBERO Tx, Руководство по эксплуатации

Страница: 56 / 80

56 - EN liberoCONFIG
LI6002Eg
USING SMARTSTART PACK & GO
4
4 Using SmartStart Pack & Go
When starting the SmartStart Pack & Go (.exe) file created with liberoCONFIG, a window
with predefined settings appears. The window text and the respective color code is defined
in the LIBERO SmartStart settings.

3.7 LIBERO SmartStart - Settings
Mode
The LIBERO Tx must
be in OFF or ConF
mode! If the modes
are not set properly, a
PDF report will be
shown!
In the window, the first item from the list is shown with a color code and name tag.
Now the LIBERO can be plugged into the USB port.
SmartStart Pack & Go then automatically sends the selected profile to the LIBERO.
THE PROFILE CHECKSUM CORRESPONDS TO THE PROFILE CHECKSUM
OF THE CONFIGURATION!

3.3.7 Configuration Profiles