ELPRO LIBERO G Series, Руководство по эксплуатации

Страница: 10 / 21

1000474V01 DOC_Operation Manual LIBERO Gx.docx | Page 10 / 21
4.4 Menu
The LIBERO G family feature a menu to operate the device:

To enter the menu, press the Menu button for at least three seconds

To switch between the menu options, press the Info button shortly

To select a menu item, press the Menu button for at least three seconds. To confirm, a selected
menu item blinks once.

the menu item FCT.RESET hast to be confirmed by pressing the Info button again shortly

to leave the menu
o
wait for 5 seconds
o
press the Start/Stop button
o
select the last menu item EXIT
All menu items and its availability are described in the table below (now menu available in SHELFLIFE /
SLEEP mode)
State
Menu
item
C
ONF
IG
ST
AR
T
DELA
Y
TRA
N
SI
T
PA
US
E
AR
R
IV
ED
ST
OP
GET.CONFI
trigger communication to pull (new) configuration from cloud
  
PUSH.DATA
trigger communication
    
RADIO.ON
Terminates flight mode (manually)
      
RADIO.OFF
The communication turns off

state changes from CONFIG / START to SHELFLIFE
(configuration remains if device started again)

state changes from ARRIVED / STOP to SLEEP
(device returns to STOP mode if started again)
   
LAST COM
show last communication time
      
ALARM.ON
activate alarm limits if configured
(state changes from PAUSE to TRANSIT)

ALARM.OFF
deactivate alarm limits if active
(state changes from TRANSIT to PAUSE)

MARK
set marker (not logged in cloud in version 1)
  
EXP DATE
show the expiry date of the device
      
FCT.RESET
reset device and confirm by pressing Info button again

a reset device has to be paired again in cloud
  