Elpress KL40, Инструкция по эксплуатации

Страница: 3 / 8

3
KL40 | INSTRUCTIONS FOR USE
1. ASSISTANCE
In case of questions regarding this product, please contact your Elpress supplier or Elpress directly
through the customer support department at the main office i Kramfors, Sweden.
Telephone: +46 612 71 71 99
Telefax: +46 612 71 71 51
mail: sales@elpress.se
2. TECHNICAL DATA
The KL40 hydraulic cutting head must be connected to a 700 bar hydraulic group, with
high-pressure hose and couplings. Refer to ”groups” - pages 86>95.
The KL40 hydraulic cutting head has the same force, passage and capacity than the XXXX hand
tool or XXXX Elec battery-operated model: cutting of steel cooper or aluminium cables, with a
40 mm max. passage. Refer to capacities chart below.
This head is supplied with a protection kit to safe the technician. Quick opening and closing head.
Force
Max. Passage Dimension Weight Steel Copper
88kN Ø40 285x85x105 4,300kg ALU
Max. hardness Max Ø of out
copper <40 daN/mm² Ø 40
aluminium <20 daN/mm² Ø 40
hard copper <34 daN/mm² Ø 40
Cables steel <180 daN/mm² 19 x Ø 2,3 (= Ø 11,5)
multistrand steel <180 daN/mm² Ø 18 (strand qty > 200)
MAX medium hard steel <180 daN/mm² 54 x Ø 4,36 + 19 x Ø 2,62 (= Ø39,20)
CUTTING
CAPACITIES
steel <42 daN/mm² Ø 20
Bars copper <25 daN/mm² Ø 32
aluminium <16 daN/mm² Ø 40