Elpine 31362c Скачать руководство пользователя страница 2

• Before connecting the appliance ensure that the voltage indication the underside of the appliance 

corresponds with the mains voltage in your home.

• Connect the appliance to an earthed wall socket
• Position the appliance so that: -the power cord is not hanging over the edge of the table or sink; -it 

is standing on a flat surface with sufficient free space around it.

• Never put the power cord near to or in contact with the hot surface of the appliance.
• Always preheat the cooking plate before starting to cook.
• Unplug the appliance after use.
• Avoid touching the metal parts as they become very hot.
• Never use sharp or abrasive items in contact with the cooking plate as this will damage the 

nonstick surface.

• Always clean the appliance after use First unplug and allow the appliance to cool down. Never 

immerse the appliance into water. Avoid water running into the appliance.

• If the mains cord of this appliance is damaged, it must only be replaced by their service 

representative, as special tools and/or parts are required.

• This appliance is not intended for use by person (including children) with reduced physical, 

sensory or mental capabilities or lack of experience and knowledge, unless they have been given  
supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.
• The appliance is not intended to be operated by means of an external timer or separate remote 

control system.

saVE tHEsE INstRUCtIONs

Before first use

• Clean the baking plates with a damp cloth or sponge.
• Slightly grease the baking plates with a little butter or cooking oil.
• Plug in the sandwich maker and heat up the plates until the green Ready to cook pilot light goes 

off. The sandwich maker is ready for use

 Note: when using this sandwich maker for the first time, a fine smoke haze may result. This is 

normal because of the initial heating of the internal components.

Making toasted sandwich 
• Put the mains plug into the wall socket. The red power light and green power light will both 

illuminate to show that the sandwich maker is heating.

• Prepare the bread and filling for your sandwich while sandwich maker is pre-heating.
• Wait until the green on pilot light gets off. , the sandwich maker is then at the correct temperature 

for use.

• To obtain an even golden brown result, you can slightly butter the side of the bread in contact with 

the plate.

• Lay the slices of bread with the buttered side on the lower cooking plate, place your filling and 

cover with the second slices of bread with buttered side up. You can toast only one sandwich if 
you wish. For optimal result, fillings should be placed well within the sandwich slices.

• Lower the upper cooking plate carefully onto the bread until the sandwich maker is tightly 

clamped.

BEfORE OpERatINg tHIs UNIt, plEasE REad tHEsE 

INstRUCtIONs COmplEtEly.

Отзывы: