All repairs must be carried out by an Electrically Qualified Person.
8. Only use attachments that are supplied with this appliance.
9. Do not use outdoors.
10. Do not let cord hang over edge of a table or counter.
11. Keep hands and utensils out of container while blending. The scraper may be used but only
when the blender is not running.
12. Blades are sharp. handle with care.
13. To reduce the risk of injury, never place cutter-assembly blades on base without jar properly
attached.
14. Always make sure the cover is securely locked in place before operating appliance.
15. Always operate blender with cover in place.
16. When blending hot liquids, remove center piece of two-piece cover.
17. Don’t switch on the appliance without any food or water.
18. Only use appliance for its intended use.
sAVe these instRuCtions
Before firST USe
• All parts of the blender are to be thoroughly cleaned before being used for the first time.(see
Section: Cleaning).
• Take out the required length of cable from the cable tidy on the base of the blender and connect
the device to the mains supply.
aSSemBly of The GlaSS jar
1. PUT THE RUBBER SEALInG (4) On THE InnER EDGE Of THE BLADE UnIT (5).
2. PUT THE BLADE UnIT WITH SEALInG RInG AnD RInG (10) InTO THE CUP BASE (6).
3. MOUnT THE GLASS JAR (3) OnTO THE CUP BASE AnD SECURE In PLACE By TURnInG In A
CLOCKWISE DIRECTIOn UnIT IT IS fIxED TOGETHER.
4. MOUnT THE CUP WITH CUP UnIT OnTO THE BASE UnIT.
5. AfTER PUTTInG THE InGREDIEnTS In THE CUP fIT THE LID (2) OnTO THE CUP By
PRESSInG DOWn.
6. InSERT THE InnER COVER (1) InTO THE OPEnInG Of THE LID, AnD TURn IT In
AnTICLOCKWISE DIRECTIOn UnIT IT IS LOCKED In PLACE..
7. PUT THE BLADE UnIT WITH SEALInG RInG InTO THE CUP BASE (6).
8. MOUnT THE GLASS JAR (3) OnTO THE CUP BASE UnIT AnD TUnE THE CUP BASE UnIT, AnD
TUnE THE CUP BASE UnIT In CLOCKWISE DIRECTIOn UnIT IT IS fIxED.
9. MOUnT THE CUP WITH CUP UnIT OnTO THE BASE UnIT.
10. AfTER PUTTInG THE InGREDIEnTS In THE CUP, fIx THE LID (2) OnTO THE CUP By
PRESSInG DOWn.
11. InSERT THE InnER COVER (1) InTO THE OPEnInG Of THE LID, AnD TURn IT In
AnTICLOCKWISE DIRECTIOn UnTIL IT IS LOCKED.
