5
HOW TO USE
Permanent hair removal treatment
Before use, preferably wax all the hair around the treatment area. If
you can´t wax, you can shave the area.
Insert the power cable into the machine and plug it in.
Turn on the machine from the power by pressing it for 2 or 3
seconds until the device turns on.
With the same power button, select the desired power level. Each
time the button is pressed, a power level will rise. If at the lowest
power levels you do not feel tingling or some discomfort, it is best to
select the highest possible power level.
Rest the lamp on the skin and once the green lights on the sides of
the device flash, press the fire button on the device handle. Repeat
shots on the same area 2 or 3 times for best results. To be able to
issue the next shot it will be necessary to wait for the green lights on
the side of the machine to flash.
To allow the machine to shoot automatically without pressing the
shutter button, you can enter the automatic use mode. To enter
automatic mode, press the shutter button for two or three seconds
until two beeps are emitted. This way, the machine will emit the
shots automatically when the lamp is resting on the skin. Keep the
lamp supported until 2 or 3 shots are emitted for best results.
To return to manual shooting mode it will be necessary to press the
shutter button again for 2 to 3 seconds until two beeps are heard
again.