15
0 6
Grounding & GFI Outlet Instructions
Release the product by pressing the quick release button and pull out
the product.
Drain the water from the tank by unscrewing the tank closer by coin.
After drain the tank water then screw on the closer properly.
Open the water supply valve of the 85 Series.
Plug in the power cord.
In case the product is not use for a long period, we recommend to
fully respect following operation :
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
Unplug the power cord.
Turn off the tap water shut-off valve.
PRIOR TO REUSE THE 85 Series :
DANGER :
Improper use of the grounding plug can result
in a risk of electric shock.
●
If repair or replacement of the cord or plug is necessary, do not connect the
grounding wire to either flat blade terminal. The wire with insulation having an
outer surface that is green with or without yellow stripes is the grounding wire.
●
Check with a qualified electrician or serviceman if the grounding instructions
are not completely understood, or if in doubt as to whether the product is
properly grounded.
If it is necessary to use an extension cord, use only a three wire extension
cord with a threeblade grounding plug, and a three-slot receptacle that will
accept the plug of the product. Replace or repair a damaged cord immediately.
This product should only be used
with a grounded GFI (Ground Fault
Interrupter) outlet and a grounded
3 prong electrical cord as shown in
figure A. In the event of an
electrical short circuit, using a
grounded GFI outlet reduces the
risk of electric shock.
This product is equipped with
agrounded cord and is for use on a
nominal 110V/220V circuit only (min 15 amps) and must be plugged into
an outlet that is properly grounded with a GFI breaket as shown. Replace
or repair a damaged cord immediately.
Ground GFI Outlet
Bidet Seat Cord
with Grounding Pin
Grounding Pin
Receptacle
test
reset
Receptacle
test
reset
Europe
USA
figure A
Extension Cord
