Elon Elvita CCS4640X, Руководство пользователя

Страница: 17 / 28

Cleaning 17
© 2020, Elon Group AB. All rights reserved.
Clean stainless steel surfaces
Clean stainless steel surfaces with a mild detergent and a soft sponge that will not scratch the surface.
CAUTION!
Do not use abrasive cleaners or cleaners containing solvents as they may damage the surface.
Clean enamel surfaces
Clean enamel surfaces with a damp sponge. Remove fatty stains with warm water and special detergent for enamel.
CAUTION!
Do not clean enamel surfaces with abrasive cleaners or tools as they may cause permanent damage.
Clean plastic parts and lacquer-coated surfaces
Immediately remove any stains on plastic parts and lacquer-coated surfaces with a soft non-abrasive cloth and some
water. You may also use cleaners and cleaning tools intended for plastic and lacquer-coated surfaces. Follow the
manufacturer's instructions.
CAUTION!
Do not use abrasive cleaners, abrasive tools, or alcohol-based cleaners.
Clean the oven
Clean the oven cavity regularly.
CAUTION!
Do not lean against the open door when cleaning the oven cavity. Never stand on the open oven door and do
not let children sit on it. The oven door hinges may be damaged under excessive load.
CAUTION!
Do not use abrasive agents. They will scratch enamel coated surfaces.
• Clean the oven walls with a damp sponge and detergent. Use a special enamel detergent for burned stains.
• Wipe the oven dry carefully after cleaning it.
• Clean the wire guides and telescopic guides using a conventional detergent.
CAUTION!
Do not clean the telescopic guides in a dishwasher.
• Clean the oven utensils with a sponge and detergent. You can use special detergents for rough stains or burns.
Use the WaterClean programme
Use the WaterClean programme to easily remove stains and food residues from your oven.
CAUTION!
Make sure the oven has cooled down before you start the WaterClean programme.
1.
Turn the cooking mode selector to .
2. Turn the temperature selector to 70°C.
3. Pour 0.6 l water into a baking tray and place it in the lower guide.