Connect power and ethernet cables
: Connections are
underneath the register near the back.
Install receipt paper:
Install the paper by pressing the lid
release button and lifting up on the printer lid. Note the correct
paper orientation from the pictures above.
If an internet connection is not found in step 3, hold the power button
down for 3 seconds and release. This lets you enter the set-up page
to find your WiFi connection. Under the Network Tab, select your WiFi
network. Once connected your device should start auto-provisioning itself
to your software provider. Once set up is complete, password
1elo
can be
used to re-enter your control panel if needed.
Mini-USB
Ethernet
Power on the register
: Press the power button. If an ethernet internet
connection is available, registration will start automatically when the
device powers on.
1
2
3
Power
4
