SmartSet Technical Reference Manual—Addendum for the E281-2310 Controller
1
DOC # SW000027-B (Preliminary) August 13, 1998
E281-2310 Serial Controller
The following figure shows the mounting dimensions, jumper locations, and
connections for the IntelliTouch
®
E281-2310 serial controller:
Figure 1. E281-2310 Serial Controller
The following table lists the jumper settings for the E281-2310 controller:
(From Top)
Reserved
J0 - N
Reserved
J1 - N
Emulation Mode
None
J2 - N
E281A-4002
J2 - Y
Reserved
J3 - N
E281-2310 Emulation Modes
If you are using driver software that does not directly support the SmartSet™
serial protocol (E281-23xx, E271-22xx), the controller can be set up through
jumper J2 for hardware compatibility with the IntelliTouch E281A-4002
controller.
