background image

User Manual ET1502LM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

     

                                            30

 

 

Section 8: Warranty Information 

Except as otherwise stated herein, or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in 
materials and workmanship. The warranty for the touch monitors and their components is three years.

 

 

Seller makes no 

warranty regarding the model life of components. Seller’s suppliers may at any time and from time to time make changes in the components 

delivered as Products or components.

 

 

Buyer shall notify Seller in writing promptly (and in no case later than 30 days after discovery) of the failure of any Product to conform to the warranty set forth 
above; shall describe in commercially reasonable detail in such notice the symptoms associated with such failure; and shall provide to Seller the opportunity to 
inspect such Products as installed, if possible. The notice must be received by Seller during the Warranty Period for such a product, unless otherwise directed in 
writing by the Seller. Within 30 days after submitting such notice, Buyer shall package the allegedly defective Product in its original shipping carton(s) or a 
functional equivalent and shall ship to Seller at Buyer’s expense and risk.

 

 

Within a reasonable time after receipt of the allegedly defective Product and verification by Seller that the Product fails to meet the warranty set forth above, 
Seller shall correct such failure by, at Seller’s discretion, either (i) modifying or repairing the Product, or (ii) replacing the Product. Such modification, repair, or 
replacement and the return shipment of the Prod

uct with minimum insurance to Buyer shall be at Seller’s expense. Buyer shall bear the risk of loss or damage in 

transit, and may insure the Product. Buyer shall reimburse Seller for transportation cost incurred for Product returned but not found by Seller to be defective. 
Modification or repair of Products may, at Seller’s discretion, take place either at Seller’s facilities or at Buyer’s premises. If Seller is unable to modify, repair, or 
replace a Product to conform to the warranty set forth above, then 

Seller shall, at Seller’s discretion, either refund to Buyer or credit to Buyer’s account the 

purchase price of the Product less depreciation calculated on a straight-

line basis over Seller’s stated Warranty Period.

 

 
These remedies shall be the buyer’s exclusive remedies for breach of warranty. Except for the express warranty set forth above, seller grants no other warranties, 
express or implied by statute or otherwise, regarding the products, their fitness for any purpose, their quality, their merchantability, their non-infringement, or 
otherwise. No employee of Seller or any other party is authorized to make any warranty for the goods other than the warranty 

set forth herein. Seller’s liability 

under the warranty shall be limited to a refund of the purchase price of the product. In no event shall Seller be liable for the cost of procurement or installation of 
substitute goods by Buyer or for any special, consequential, indirect, or incidental damages.

 

 

Buyer assumes the risk and agrees to indemnify 

Seller against and hold Seller harmless from all liability relating to (i) assessing the suitability for Buyer’s 

intended use of the Products and of any system design or drawing, 

and (ii) determining the compliance of Buyer’s use of the Products with applicable laws, 

regulations, codes, and standards. Buyer retains and accepts full responsibility for all warranty and other claims relating t

o or arising from Buyer’s products, which 

include or incorporate Products or components manufactured or supplied by Seller. Buyer is solely responsible for any and all representations and warranties 
regarding the Products made or authorized by Buyer. Buyer will indemnify Seller and hold Seller harmless from any liability, claims, loss, cost, or expenses 
(including reasonab

le attorney’s fees) attributable to Buyer’s products or representations or warranties concerning same.

 

Содержание E542617



































Отзывы: