Elo TouchSystems E391994, Руководство пользователя

Страница: 29 / 81

UM600644 Rev A page 29 of 81 User Manual
–
I-Series 4 Slate Value
Disconnecting a connected Wireless Network
•
Tap setting of the connected device.
•
Tap (FORGET) icon to disconnect.
Ethernet Lan (Gigabit)
Note: To connect the I-Series 4 Slate to Ethernet, it will need an Elo I/O hub (E391994) or a POS stand (E392186/E482347). When available, the
I-Series 4 Slate will automatically prioritize the ethernet connection. If the I-Series 4 Slate does not, please follow the steps below.
•
Place the I-Series 4 into the Elo Home APK.
•
Set Wi-Fi to disable.

Go to Wi-Fi settings, tap
Use Wi-Fi
to disable .
•
Tap
Ethernet
.
•
Tap toggle switch to enable .
Airplane mode
This will disable all of the wireless transmission functions. Including cellular, Wi-Fi, and Bluetooth.
•
To enable , tap Airplane mode .
USB tethering
This feature is for sharing Internet connection to another device using a USB cable.
Note: The USB cable must be connected first from I-Series 4 to another device or PC. If using the IO Hub plug in a USB type A cable
from your PC in any one of the four USB type A ports. If using the POS stand, plug in to one of the four USB ports in the neck of the
stand behind the Display.
See Connected device → USB on this user manual.
•
Tap Hotspot and tethering.
•
Tap
USB tethering
, to enable .
Bluetooth tethering
This feature is for sharing internet network connection to another device using Bluetooth.
Note: The Bluetooth must be paired first from I-Series 4 to another device or PC. See Connected devices → Bluetooth on this user
manual.
•
Tap Hotspot and tethering .
•
To enable , tap Bluetooth tethering .
Data Saver