background image

User Manual ET1002L, ET1302L, ET1502L 

 

Section 1: Introduction 

Product Description

 

Your new touch monitor combines the latest developments in touch technology and display design with reliability for use in high-traffic environments.

 

 

This 

touch monitor incorporates a 24-bit color, active matrix thin-film-transistor LCD panel to provide high-quality display performance. ET1002L supports 

HD 1280 x 800. ET1302L, ET1502L supports full HD 1920 x 1080. Its LED backlight significantly reduces power consumption and eliminates the need for 
mercury (compared to CCFL-

backlit panels). Other features that enhance this LCD monitor’s performance are USB Type-C (display, touch and video), 

Plug & Play compatibility, remote on-screen display (OSD) controls and flexible mounting options. 

 

Part Number 

Part Description 

Touch Technology 

Surface Treatment 

Touch Interface  Color 

E155834 

ET1002L-2UWC-1-G 

PCAP 

Anti-glare 

USB 

Black 

E324341 

ET1002L-0NWC-1-ZB-GY-G 

No Touch 

Anti-glare 

USB 

Black 

E683204 

ET1302L-2UWA-1-BL-G  

PCAP 

Anti-glare 

USB 

Black 

E683595 

ET1302L-2UWA-1-BL-NS-G  

PCAP 

Anti-glare 

USB 

Black 

E683396 

ET1302L-2UWA-1-WH-G 

PCAP 

Anti-glare 

USB 

White 

E683787 

ET1302L-2UWA-1-WH-NS-G 

PCAP 

Anti-glare 

USB 

White 

E155645 

ET1502L-2UWC-1-G 

PCAP 

Anti-glare 

USB 

Black 

E125496 

ET1502L-2UWC-1-NS-G 

PCAP 

Anti-glare 

USB 

Black 

 

 

Precautions 

Follow all warnings, precautions and maintenance as recommended in this user manual to maximize the life of your unit and prevent risks to user safety. 
See the Safety & Maintenance Section for more information.

 

 

This manual contains information that is important for the proper setup and maintenance of the unit. Before setting up and powering on your new touch 
monitor, read through this manual, especially the Installation, Mounting, and Operation Sections.

 

 
 
 
 
 
 
 
 

 

Содержание E125496




































Отзывы: