Elo TouchSystems AMM17TK, Руководство пользователя

Страница: 17 / 37

AMM17TK/AMM18TK/AMM19TK 15
DDC
To make your installation easier, the monitor is able to Plug and Play with your system if your
system also supports DDC protocol. The DDC (Display Data Channel) is a communication
protocol through which the monitor automatically informs the host system about its
capabilities, for example, supported resolutions and corresponding timing. The monitor
supports DDC1 and DDC2B standard.
Installation with sound board or sound source
To install the monitor for input/output sound, please follow the steps as given below:
Steps
1. Connect sound source (ex. sound output from sound card, sound output from CD player or
DVD player, etc.) to Audio In.
2. Connect sound source receiver (ex. sound input or Mic input from the sound card) to Mic
out.
3. At the front of the monitor there are two connection, Audio Out and Mic In. Connect any
type of sound output device (ex. speaker, earphone, etc.) to Audio Out. Mic In is for
microphone input connection.
AC power adapter
Audio Out
Mic In
Audio in cable
Mic out cable