User manual: KIT-NFC-LF/HF-EDGE CONNECT Page 17 of 20
c. Remind the user that changes or modifications to the device that are not expressly approved by the compliance
responsible party may invalidate the user's authority to operate the device.
2. If the device appears to be interfering with radio or television reception or any other device.
Confirm as an emission source by turning the device off and on. If you determine that the device is
causing the interference, try one or more of the following measures to correct the interference:
a.
Move the digital device away from the affected receiver.
b.
Reposition (rotate) the digital device relative to the affected receiver.
c.
Relocate the affected receiver antenna.
d.
Plug digital devices into different AC sockets so that digital devices and receivers are on different branch circuits.
e.
Disconnect and remove any I/O cables that the device does not use. (Untired I/O cables are a potential source of
high RF emission levels.)
f.
Plug the digital device into the ground socket. Do not use the AC power adapter plug. (Removing or cutting the
power cord to ground may increase the RF emission level and may pose a deadly risk of electric shock to the user.)
If you need additional help, consult your dealer, manufacturer, or experienced radio or television
technician.
Radio Equipment Instructions
Elo hereby declares that the type of radio device complies with the 2014/53/EU Directive. EU
Declaration of Conformity is available at:
This equipment is for indoor use only.
Obtained Certification
This peripheral has been certified and marked as follows:
•
UL, FCC (US)
– Class B
•
cUL, IC (Canada)
•
CB (International Safety)
•
SRRC(China)
•
CE (Europe)
– Class B
•
VCCI (Japan)
•
RCM (Australia)
•
China RoHS
