User Manual: EloPOS Pack
UM600363 Rev A, page 23 of 37
Power Adaptor Support Notice
The following information will help with management of power supply and usage on your EloPOS Pack.
The +24 Volts 180W power adaptor (E511572/E511766) can’t support all full I/O port specs at the same time; it will limited to configuration by +12
Power USB (5 Ports/1A) and +24 Power USB (1 Port/0.5A), unless great care is taken to check the total wattage of the system.
Do not exceed a total of 180 watts. Take the wattage below and add the Elo Peripherals or your other devices and check that you are under 180
watts. If you need help with the power requirements for your application, please contact Elo support to help you with the set up and
calculations.
The Elo PNs corresponding power adaptor model name list as below table.
Configuration
ELO PN
Part Description
EPS00E2/EPS00E3/EPS00E5
E511572
AIO POWER BRICK, 24VOLT 180W, DELTA
Care and Handling
The following tips will help keep your EloPOS Pack functioning at an optimal level:
Disconnect the AC power cable before cleaning.
To clean the unit, use a clean cloth lightly dampened with a mild detergent.
It is important that your unit remains dry. Do not get liquids on or inside the unit. If liquid does get inside, turn the unit off and have a qualified
service technician checks it before you power it on again
Ensure the environmental temperature and humidity are maintained within specification and do not block ventilation slots.
The unit is not designed for the outdoors.
