UM600456 Rev. B, page 24 of 29
User Manual
–
3263L/4363L Series IDS
2) If this equipment appears to cause interference with radio or television reception, or any other device:
a) Verify as an emission source by turning the equipment off and on. If you determine that this equipment is causing the interference, try
to correct the interference by using one or more of the following measures:
i. Move the digital device away from the affected receiver.
ii. Reposition (turn) the digital device with respect to the affected receiver.
iii. Reorient the affected receiver’s antenna.
iv. Plug the digital device into a different AC outlet so the digital device and the receiver are on different branch circuits.
v. Disconnect and remove any I/O cables that the digital device does not use. (Unterminated I/O cables are a potential source of high RF
emission levels.)
vi. Plug the digital device into only a grounded outlet receptacle. Do not use AC adapter plugs. (Removing or cutting the line cord ground
may increase RF emission levels and may also present a lethal shock hazard to the user.)
If you need additional help, consult your dealer, manufacturer, or an experienced radio or television technician.
III. Agency Certifications
The following certifications and marks have been issued or declared for this touch display:
Argentina S-Mark
Korea KC, e-Standby
Australia RCM
Mexico NOM
Canada CUL, IC
Russia EAC
China CCC
Taiwan BSMI
Europe CE
United States FCC, UL
Japan VCCI
IK07 and UL 62368-1 for ball drop test
Energy Star 8.0
Energy Star (applicable only for models bearing the Energy Star logo)
This product qualifies for ENERGY STAR
®
in the factory default (Home configuration)
setting. Changing the factory default settings or enabling other features may increase
power consumption that could exceed the limits necessary to qualify for ENERGY
STAR
®
. Refer to ENERGYSTAR.gov (
) for more information on the
ENERGY STAR
®
program.
