User Manual
–
2D Barcode Scanner
UM600149 Rev B, page 8 of 22
Section 3: Configuration
Out-of-box Settings
Out of the box the default settings of the barcode reader will be:
-
USB VCP (Virtual COM Port)
-
Presentation Mode
o
Illumination always on
o
Red aimer will turn off between reads
-
Most common barcodes enabled
-
Beep on successful scan
If you are okay with the default settings you may begin using the 2D scanner. If you prefer different settings, this section will cover additional configurations that can be
tailored to your application. Only the most common settings will be covered in this manual. For additional settings, please download the N3680 User Guide from the
Honeywell website