6
PROGRAMS
Factory set programs P1 to P3:
Monday-Friday
Weekend
Programs P1 to P3 are not to be modified, they
are factory set.
The remote control has:
-
3 preset programs, P1, P2, P3 and
-
3 programs to be set by the user P4, P5, P6
In order to modify a program (P4 to P6):
-
Press the keys
Comfort
/
Economy
/
Frost
Protection
to select the mode.
-
The cursor will move from one hour to another,
meanwhile the screen will show the reference hour.
Note:
by default the non-programmed timeline is set to
Frost Protection
.
-
Validate with OK in order to pass to the next day
and repeat the steps up to the day 7 (Sunday).
In order to transmit
programs to the heater:
-
Press the
AUTO
Key
Arriving at day 7 the remote control will offer the
next program.
Comfort
Economy
Frost Prot.
=
=
=
(empty)
The user should go to programs P4 to P6 in order to
create user-defined programs.
Example of programing:
-
Press the key
PROG
.
-
The remote control will offer the first preset
program (P1).
-
Pressing
OK
for two times, follow with the next
program (P2).
Note: it is possible to reduce the programming
pressing the key AUTO.
The long pressing OK key will copy the current
day setting to the next day.
7
AUTO Mode
-
Press the key P in order
to select the program to
be transmitted.
Example for P4
-
Direct the remote
control unit towards the
receiver, press the
key. The transmission
will start (processing...).
-
Wait for the approval of
the emitter by display
illumination.
In case if there had not been implemented no
programs from P4 to P6, all the values will be in
Frost Protection.
