8
The heater must be installed no less than 40cm from side walls. The heater must be installed at least 1.8 m
above the floor. It is essential that the indicated minimum clearances are maintained.
3. INSTALLATION
Wall/ceiling installation brackets are provided with the heater which has been specifically designed to allow
this product to be fitted to a wall or ceiling with adequate clearances at the back of the unit. Do not install
the heater with any other bracket except those provided.
Before drilling ensure that there are no wires or water pipes in the area where the heater is to be installed.
Fasten the brackets securely to the mounting surface and the backside of the heater using the nuts and
screws supplied.
Fasten the heater securely on the brackets using the nuts and bolts supplied.
The brackets can be used to adjust the direction of the heater, adjust the heater angle by loosening the two
bolts on the wall mounting bracket, tighten the bolts again when the desired angle is reached.
