6
EN
1. INSTALLATION
A G Control Hub is needed to control the G Control devices installed in your home (SSH Ecombi
storage heaters, radiators, thermostats, energy meters...) using the internet or a Smartphone app.
The G Control Hub USB communicates by radiofrequency with the heaters and it is connected to the
home router using the Wifi Network.
a. Register in the app-web
Registering and creating a user account is
required for remote control of your
installation via internet. If you do not have a
user account in Elnur Wifi Control, the
first step is to register in the portal using
the website
https://remotecontrol.elnur.es
or using the app Elnur Wifi Control
available in App Store for IOS and Play
Store for Android.
Enter a valid mail address that must be
verified and a password. An email will be
automatically sent to your inbox to verify
the registered e-mail.
b. G Control Hub USB Installation
Connect the G Control Hub USB Smartbox to any USB Port. Can be the router USB port or any
other like a phone charger.
c. New Home. Adding a new G Control Hub USB
To control remotely your installation, you must link your G Control
Hub with your registered user account. Several G Control Hubs can be
associated to the same registered user account in order to control
different installations if necessary.
To associate G Control Hub with your user account, you must enter on
the “Homes”
→
“New Home”
menu available on the right pop up menu
of the website or the mobile app and follow the instructions of the
installation wizard.
Содержание 90000125
Страница 1: ......
