Elnec 51&AVRprog, Руководство пользователя

Страница: 87 / 129

Software
87
Failure number of operations which where not
successfully completed
Total number of all operations
Count down informs about Count down activity (Enabled
or Disabled)
Remains informs about remaining number of device
operations to do
Successful operation means any device operation of these,
which is completed without errors:
•
program
•
verify
•
blank check
•
erase
•
read
If device operation is finished with error(s) it is not
successful operation.
When new device type is selected, all statistics values are
set to zero and
Count down is set to Disabled .
Reset button in Statistics panel reset statistics values.
Reload Count down button in Statistics panel reloads
initial value to Count down .
Device / Device options / Associated file
This command is used for setting associated file with
current device. This is a file, which can be automatic
loaded to buffer after device is selected from default
devices select list or by start control program.
You can edit the associated file name in file name box, put
a full pathname. The control program checks the present of
this file on the disk. Also is possible enabling or disabling
automatic load of this file.
You can save both settings i.e. associated file and enabling
of automatic load of this file to disk by command
File / Exit
and save .
Device / Blank check
This command allows to blank check of all devices or its
part if possible. The control program reports a result of this
action by a write of a warning message to INFO window.
The menu command Device / Device options / Operation
options allows to set another working area as the
standard.