Troubleshooting
If the update could not be completed, please check the following:
・
Make sure the USB flash drive is properly inserted into your eXpressive 900.
・
Make sure you have not turned the power switch OFF or disconnected the USB flash drive from your
eXpressive 900 before the update is complete.
・
Make sure the update files have been properly copied to the USB flash drive by following the procedure
below.
1.
Open the extracted
“
UpdateeXpressive900v120
”
folder on your PC.
Open the
“
PROG
”
folder with Explorer.
2.
Open the USB flash drive with Explorer.
3.
Check and be sure that both folders
’
contents are same including those of the file sizes.
If the LCD screen turned red when updating, follow the procedure below.
(1)
Turn your eXpressive 900
’
s power switch OFF.
Remove the USB flash drive.
(2)
Turn your eXpressive 900
’
s power switch ON and check the result. (Do not press
any buttons when turning the switch on.)
* If your eXpressive 900 starts without any problems, it indicates that your
eXpressive 900 cannot detect the USB flash drive. Prepare another USB flash
drive and repeat the procedure from 1.
* If the LCD screen of your eXpressive 900 turns red when turning the power
switch ON, it indicates your eXpressive 900 failed to update. Repeat the
procedure from 1.
If the LCD screen of your eXpressive 900 remains black more than 1 minute after turning the power ON, contact
the nearest authorized dealer.