ELNA eXcellence 680, Инструкция по эксплуатации

Страница: 70 / 96

68
Free Motion Quilting (1)
Machine settings
q
Pattern: MODE 1: 04S
w
Thread tension: AUTO
e
Presser foot: Convertible free motion quilting
foot QB-S
r
Foot pressure: 5
t
Feed dog: Lowered
q
e
w
r
Attaching the convertible free motion quilting foot
Attach the needle plate for straight stitch (refer to page 16).
Loosen the setscrew and remove the foot holder.
Attach the convertible free motion quilting foot to the
presser bar and tighten the setscrew firmly with the
screwdriver.
Place the fabric under the foot.
Adjust the height of the foot by turning the round nut until
bottom of the foot barely touches top of the fabric.
q
Setscrew
w
Presser bar
e
Round nut
q
w
e
t
Changing the foot
This foot is comes with the closed-toe foot attached,
however, it is convertible to the open-toe foot and clear
view foot.
To change the foot, raise the foot and turn the round nut
to bring the foot to the lowest position.
Remove the setscrew and remove the closed-toe foot.
Attach the desired foot and secure it with the setscrew.
Adjust the height of the foot.
q
Setscrew
w
Closed-toe foot
e
Open-toe foot
r
Clear view foot
Sewing
Baste or pin the quilt layers. Draw a quilt design on the
top fabric with a washable maker.
Sew at medium speed while guiding the quilt layers with
your hands.
Move the quilt layers 3 mm (1/8˝) or less per stitch.
q
w e r
CAUTION:
Do not select any pattern other than the straight stitch
with left needle position.
Do
not move the quilt layers toward you when the
open-toe foot is attached.