ELNA CE10, Руководство по обслуживанию

Страница: 12 / 31

10
Adjusting Needle Bar Height
1 Remove the needle, presser foot, Needle plate (A)
and Bobbin holder (B) .
2 Remove the face cover.
3 Rotary hook meets the Right side of the needle
in ascending travel of needle from its lowest position
by turning the handwheel toward you.
4 Loosen Screw as shown.
5 Move the Needle bar up or down to adjust the
needle bar height.
6 Place the Needle bar groove in front of you and
tighten Screw .
7 Attach the Bobbin holder (B) , Needle plate (A) ,
presser foot and needle.
8 Attach the face cover.
Needle plate (A)
Bobbin holder (B)
Screw
Needle bar
Groove
Needle # 14
Matching point
Surface of hook race
1.6 - 2.0 mm
Rotary hook race
Top of needle hole
The standard distance between the upper edge of the needle eye and the tip of the rotary
hook should be in the range of 1.6 - 2.0 mm when the rotary hook meets the right side of the
needle in ascending travel of needle from its lowest position.
2
1
3
4
6
5
7
8
9
10
11
1
2
7
3
4
5
6
2 1
2
1
3
4
6
5
7
8
9
10
11