ELNA ARTISTIC PRESS, Руководство по обслуживанию

Страница: 6 / 17

6
MOVABLE HANDLE
D
ISMANTLING
1.
Dismantle the upper handle cover; see
page 4;5.
2.
Put the press in its closed position.
3.
Keep the press closed.
4.
Compress the pressure arm by putting
a small nail (B) into the hole (C).
5.
Open the press and fit a gauge of
100[mm] of height in the middle.
6.
At that point the movable handle will
be loosen.
7.
Loosen the two screws (E) and
disengage the two axles (F).
8. Take out the movable handle.
R
EASSEMBLING
1. Before replacing the movable handle, grease the two bearings.
2.
Push the two axles (F) inside the new pressure arm and tighten it with the screws (E).
3.
Take away the gauge and make a small pressure on the movable arm too take out the
nail.