M60 / M90 Modena – Owner’s Manual – Ver: 2.31
8
Elmwood Amps AB
CHANNEL 2
Channel 2 / Channel 2 – Drive
•
Press the Channel switch on the foot switch so that the led will light up to
activate Channel 2.
As on Channel 1 there are many possibilities to tailor the sound by adjusting; Gain,
Volume, Treble, Mid and Bass. At lower Gain settings there is the same smooth, touch
sensitive feel/sound as on Channel 1.
By activating Drive on Channel 2;
•
Press the Drive switch on the foot switch so the led will light up
- and having low gain setting - the drive control can be turned up to achieve a
competent crunch/lead sound. With this setting you can go from bluesy break-ups to
fat crunch and lead simply by pressing the drive switch on the foot switch.
•
Press the Drive switch on the foot switch so the led will go dark
When turning the Gain control more clockwise; the gain will increase and the sound will
become more compressed. Even if the gain and compression increases - the string
definition and tone will remain. If setting the Gain control to, say 12 o’clock, there will
be a very potent rock/hard rock rhythm sound.
With this gain setting you can again activate Drive;
•
Press the Drive switch on the foot switch so the led will light up
- and increase Drive settings for even more fat, singing lead tones.
Note:
Avoid having Drive, Gain and Channel 2 Volume set to
fully clockwise as it may cause oscillation due to the large
amount of gain.