ElmoTech Ltd.
Version 1.0
5.
Wait for up to two minutes in each checked location. During these
two minutes four transmissions should be received from the PID.
If four transmissions are received before two minutes have
elapsed, you can move with the Offender to the next location to be
checked.
If less than four transmissions are received, phone the Monitor
Center/ Agency and ask to change the range setting to a longer
range.
If the range setting is already set at long range, relocate the STaR
in order to get better coverage.
6.
After satisfactory testing of all relevant locations, ask the Monitor
Center/Agency personnel to end the range test (manually). If the
range is not sufficient, you have to ask the Monitor Center/Agency
to perform a new ‘Start Range’ with a longer range and then re-
test where the previous test failed.
7.
Upon ending the range test, the STaR unit makes an audible
beeping sound to indicate range test completion.
As a precaution against accidentally leaving the STaR
unit in the range-testing mode, the STaR unit automatically
terminates the range test 15 minutes after initiation.
Therefore, if the range test lasts longer than 15 minutes, you
will have to make a request to the Monitor Center / Agency
to re-activate it.
EMS2000i STaR Unit User Manual
17
