Operating-LEDs
Power-LED
-_______
Booster is looking for connected modules
----____
Booster is operational
-----_-_
no SD card found or card is defect
---_-_-_
initialisation file not found or defect
_____-_-
warning: maximum number of samples for one
set exceeded
___-_-_-
warning: a defined sample could not be found
in the set of samples
_-_-_-_-
another critical error
Busy-LED
flickers when playing the samples
Switching the motor on and off
After the installation of the ThinkTank blaster, the engine is switched off after power up by default.
You can change the state of the engine as follows:
- HL-Tanks without S&S and proportional radio: move the left lever to the left upper position.
- HL-Tanks with S&S: After power up push the ignition button on the radio and wait approx. 10
seconds (the time span which is requied for the original HL-ignition sequence to be finished).
Move the left lever to the left upper position.
This procedure switches the tank alternaterly on and off. You cannot move the tank when the
engine is off.
User defined samples
With a six-channel proportional set up to four sounds can be defined by the
user. Every set of samples is already equipped with demo samples. To play
them cable D hast to be connected with connection 4 and the proportional
receiver.
cable black/brown:
channel 5
cable red:
channel 6
The plugs are not polarity proof! Make sure that the black cable ist connected to the ground
The samples are activated by full deflection of the controls of the channels 5 and 6 and can be
terminated by moving the controlls in the opposite direction.
Optional sample sets
Take a look at our website for information about new sets of samples. New sets can be
downloaded for free and transfered to the SD-card via USB-card reader.
In spring 2007 a tool for PC will be available which makes it easier to create new sound files.
Nicht geeignet für Kinder unter 14 Jahren.
Not suitable for Children under 14 years.
Ne convient pas pour des enfants de moins de 14 ans.
Niet geschikt voor kinderen onder de 14 jaar.
ElMod Dipl.-Inf.(FH) Thomas Kusch and Jürgen K. Huber GbR
Millotstraße 15/1
D-72622 Nürtingen
ElMod Dipl.-Inf.(FH) Th. Kusch & Jürgen K. Huber GbR
[email protected] http://www.el-mod.de