background image

- If you have any questions about the operation, safety or connection of the device that are not explained in the operating instructions, 
please contact your dealer's support or another specialist.

Electrical hazards 

- Supply the device only with low voltage as specified in the technical data. Only use current sources approved for model making, 
such as NiMh rechargeable batteries. Operation with voltages higher than 12V is not permitted. There is a fire hazard!

- Observe the limit values for currents as specified in the technical data. Exceeding the permissible values leads to overloading and 
destruction of the device and carries the risk of fire or electric shock.

- Installation and connection must only be carried out when the device is disconnected from the power supply.

- Ensure that all connecting cables have a su

cient cross-section.

Heat hazards 

- Electronic components on the product can become very hot during operation.

- During installation, ensure that there is su

cient air circulation around the device to prevent overheating due to heat accumulation.

- During installation, also ensure that there is su

cient distance to heat-sensitive and flammable objects (e.g. wooden and plastic 

surfaces, cable insulation).

- Touching the device may burn the skin.

Other hazards 

Children can cause all the risks described above due to carelessness or a lack of sense of responsibility. To avoid danger to life and 
limb, children under the age of 14 must not install our products. Small children can swallow or inhale the sometimes very small 
components with pointed ends. Danger to life! Therefore, do not allow the components to fall into the hands of small children. In 
schools, educational institutions, hobby and self-help workshops, the assembly, installation and operation of components must be 
supervised by trained personnel. In industrial facilities, the accident prevention regulations of the Association of Industrial Employers' 
Liability Insurance Associations for electrical systems and equipment must be observed.

DECLARATION OF CONFORMITY 

The product meets the requirements of EC Directive 89/336/EEC on Electromagnetic Compatibility and bears the CE marking for this 
purpose.

MANUFACTURER'S NOTE 

According to DIN VDE 0869, the person who makes an assembly ready for operation by extension or housing installation is regarded 
as the manufacturer and is obliged to supply all accompanying documents when passing on the product and also to state his name 
and address.

WARRANTY CONDITIONS 

 

This product is guaranteed for 2 years. The guarantee covers the free remedy of defects which can be proven to be 

attributable to material used by us which is not faultless or to manufacturing faults. We guarantee that the components will function in 
accordance with their characteristic values when unassembled and that the technical data of the circuit will be complied with when 
installed in accordance with the instructions and with the prescribed commissioning and operating instructions. Further claims are 
excluded. We assume no liability beyond the legal regulations of German law for damages or consequential damages in connection 
with this product. We reserve the right to repair, repair, replace or refund the purchase price.

 

In the following cases the warranty claim expires: In case of damage due to non-observance of the instructions and the 

connection diagram, in case of modification and repair attempts of the circuit, in case of unauthorized modification of the circuit, in 
case of improper removal of components not provided for in the construction, free wiring of components such as switches, 
potentiometers, sockets etc., in the event of destruction of conductor tracks and solder lugs, incorrect assembly or incorrect polarity 
of the module / components and the resulting consequential damage, damage due to overloading of the module, connection to an 
incorrect voltage or type of current, damage due to intervention by third parties, persons, incorrect operation or damage due to 
negligent treatment or misuse, damage due to contact with components before electrostatic discharge of the hands.

Nicht geeignet für Kinder unter 14 Jahren.

 

Not suitable for Children under 14 years. 
Ne convient pas pour des enfants de moins de 14 ans.

 

Niet geschikt voor kinderen onder de 14 jaar. 

ElMod Thomas Kusch 
Seebuckweg 9 
D-78054 Villingen-Schwenningen, Germany 

 

ElMod  Thomas  Kusch

 

   [email protected]         http://www.elmod.eu

Page 8

Содержание M16 v.2.0









Отзывы: