Elmo P100HD, Инструкция по эксплуатации, Страница: 9 / 104

18
Pin No. Name Pin No. Name Pin No. Name
1 Video signal (Red)
６
GND (Red)
１１
GND
2 Video signal (Green)
７
GND (Green)
１２
N.C
3 Video signal (Blue)
８
GND (Blue)
１３
Horizontal
synchronized signal
4 N.C
９
N.C
１４
Vertical
synchronized signal
5 GND
１０
GND
１５
N.C
③
To connect the unit to a device (audio amplifier etc) with an audio line output
terminal.
Connect a commercially available audio cable to the [AUDIO IN] terminal on the rear panel.
④
To switch the output image type.
Change the output image type.
⑤
To connect the unit to a device with Ethernet terminal.
Connect the supplied LAN cable to the [Ethernet terminal] terminal on the rear panel.
Explanation of the Ethernet terminal LED
⑥
To connect a PC with the USB cable.
Connect the supplied USB cable to the [USB] terminal on the rear panel.
⑦
To connect the unit to a device with an RS-232C port.
The unit can be controlled from a PC through an RS-232C cable by using [RS-232C] terminal on
the rear panel.
⑧
To connect the unit to a device (speaker with amplifier etc) with an audio line
input terminal.
Connect a commercially available audio cable to the [AUDIO OUT] terminal on the rear panel
after looping the audio cable 2 times around the ferrite core that is supplied with this product.
⑨
To connect the unit to a device with an analog RGB input terminal.
Connect the RGB cable to the [RGB OUT] terminal on the rear panel.
Only 1 RGB cable is supplied with the product.
Orange…Blinking: Access
Green … ON: Link OK