10
Cycles: 1
Total timer: 000:08:00
Example of custom program
Enter the Cycle programming menu
1
Select the 1st step and press “ENTER” key.
1.1
Go to the step menu’s bottom line, select orbital rotation mode;
set the time for 5 minutes, RPM to 100 and press
“ENTER”.
2
Select the 2nd step and press “ENTER” key.
2.1
Go to the step menu’s bottom line and select the pause mode;
set the time to 1 minute and press “ENTER” key.
3
Select the 3rd step and press “ENTER” key.
3.1
Go to the step menu’s bottom line and select orbital rotation
mode; set the time to 2 minutes, RPM to 200, and press
“ENTER”.
4
Select the 4th step and press “ENTER” key.
4.1
Go to the step menu’s bottom line and select the “NO
OPERATION” mode and press “ENTER”.
5
Go to the program menu bottom line and set the cycle value to 1.
The program is ready! Press start button to run the program.
